♦ Product Center
BMK FULLY AUTOMATIC CAR BATTERY SMART CHARGER
Have you ever had trouble with a dead battery?
Often lost in halfway home, work or trip due to low battery power or damaged battery?
NOW, BMK 5A SMART BATTERY CHARGER in hand , All the battery troubles go away!
Designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.
Charge
Maintain
Recover
Highlight of BMK Fully Automatic Battery Tender During Charging:
Alter the charging process based on organic battery feedback
Minimize energy consumption when full power is not needed
Stabilize internal battery chemistry for increased performance and longevity
Featured with LED for indicating different charging modes
4 STAGES - STANDARD CHARGE & MAINTAIN MODES
Diagnostic, Bulk charge, Absorption and Maintain
Stage 1: Desulfating the battery through 18V pulse.
Stage 2: Charging highest rate current till 80% capacity.
Stage 3: Absorption, till full capacity.
Stage 4: Float, Maintain the battery through pulse charging.
Note: If battery stays at stage 2 after 24 hours of charging, then the battery is defective.
ATTENTION:
The table shows the duration of the bulk step up to about 80% state of charge.
These data is measured under an ideal condition, just for reference.
The Charger can be used with 12-100Ah, however 12-60Ah is highly recommended for higher efficiency and battery protection
EASY TO OPERATE - PLUG & PLAY
Charging and maintaining your batteries automatically for long time
1. Connect AC cord to socket, LED will light on;
2. Connect RED clip to positive battery terminal, BLACK clip to negative;
3. The 25%-100% LEDs light will turn on in sequence;
4. Battery is fully charged when all LEDs are ON;
5. Disconnect or keep it connected in float mode.